How to configure the aluminum melting furnace
With a good 6063 How to melt, what stove, it is also crucial, and now the domestic use of the stove horizontal 1940s, there are levels of the 1990s, the worst boiler manufacturers use the original crucible. There are coal-fired, oil-fired, gas-fired and electrically heated furnaces. Some stoves have chimneys, some stoves without chimneys. Usually with mostly square furnace (rectangular furnace), advanced circular furnace, furnace can be tilted down some circular aluminum water. On the tonnage of a ton, two tons, five tons, ten tons, twenty-five tons and fifty tons aluminum melting furnace shape. A little more advanced, plus the aluminum melting furnace under a holding furnace, holding furnace formulated in 6063 with important, in this furnace slag in addition to gas, standing, and then casting rod, extrusion for use. In the original coal-fired furnace and alloy quality modern circular furnace formulated, definitely not the same. General stove, no matter what the fuel burn, should have the chimney, most waste fuel gas generated in the combustion process can be discharged from the chimney. If not all melt chimney flue gas waste water in aluminum, so cast for extrusion of aluminum rod, there is a serious internal slag bubble, which is one reason for the poor quality of aluminum, which is one of the reasons cheaper aluminum.Prev News：>
Secondary aluminum production process (3)Next News：>
Aluminum and aluminum alloy test| Updated:2015.05.29 Source: Clicks:
